IBM 7316 - TF1 Rack Console, Installation And Maintenance Manual

Page: 15 / 54

Chapter 1. Introduction
The IBM
Eserver
7316-TF3 17-Inch Flat Panel Rack-Mounted Monitor and Keyboard is a flat-panel
monitor and keyboard tray. A special keyboard, available for a variety of languages, fits inside the front of
the keyboard tray. The monitor and keyboard tray occupy 1 EIA (Electronics Industries Association) unit
1
of space in a rack cabinet. You can install a console switch behind the tray to attach more than one server
to the flat panel monitor and keyboard.
Check Your Inventory
As you unpack the kit, ensure that you have the following items:
h
Miscellaneous Hardware Kit contains:
12 cage nuts
12 clip nuts
10 Phillips screws
4 8-32 screws
2 thumbscrews
h
One keyboard tray with built-in flat-panel monitor
h
Two outer rails
h
One rail alignment spacer
h
One right-side console-switch mounting bracket
h
One left-side console-switch mounting bracket (for
routing video, keyboard, and mouse cables when a
console switch is installed)
1. Racks are measured in vertical increments of 1.75 inches each. Each 1.75-inch increment is called an “EIA.” In some countries,
the same increment may be referred to as a “U.”
1