IBM 7012 397, Site And Hardware Planning Information

Page: 236 / 415

7315-C02 Hardware Management Console (HMC)
The HMC is a user interface that provides the functions needed to create and maintain a
multiple-partitioned environment. The interface allows you to directly manipulate HMC-defined objects and
learn more about detected changes in hardware conditions. The HMC also provides service technicians
with diagnostic information for systems that can operate in a multiple-partitioned environment.
Dimensions
Height 140 mm 5.5 in.
Width 425 mm 16.7 in.
Depth 414 mm 16.3 in.
Weight
Minimum 10.0 kg (22 lbs.)
Maximum 11.4 kg (25 lbs.)
Electrical
Power source loading
(typical in kVA) 0.08 kVA to 0.30 kVA (as shipped)
Input Voltage (V ac) 90 V to 265 V ac
Frequency (hertz) 47 to 63 Hz
Thermal output (minimum) 257 Btu/hr. (75 watts)
Thermal output (maximum) 890 Btu/hr. (260 watts)
Maximum altitude 2134 m (7,000 ft.)
Air Temperature
Requirements Operating Non-Operating
10 to 35°C
(50 to 95°F)
10 to 43°C
(50 to 110°F)
Humidity Requirements Operating Non-Operating
(Noncondensing) 8% - 80% 8% - 80%
Noise Emissions
¹
Operating Idle
L
WAd
4.7 bels 4.4 bels
L
pAm
3.6 bels 3.3 bels
<L
pA
>
m
3.3 bels 3.0 bels
Impulsive or prominent
discrete tones
No No
Note: See “Noise Emission Notes” on page 336 for definitions of noise emissions positions.
218
Site and Hardware Planning Information