IBM 6400-i05, Setup Manual

Page: 217 / 370

Code V Emulation Menu
217
Data Bit 8
•
Enable (the default). The PI line is not passed directly from host to
printer; all 8 bits are used for data bits, and characters in the 80-FF
hex range can be accessed.
•
Disable. When the host PI line is enabled, indicates PI line status. To
use the PI line, disable data bit 8, and enable the Host PI
configuration option.
NOTE: Data bit 8 is interpreted as either data bit 8 or PI signal, but never
both. When enabled as data bit 8, data bit 8 has priority over the PI
signal, and all data above 7F hex is used to access character data
and not to interpret PI line data.
Conversely, when data bit 8 is disabled and the PI signal is used,
data bit 8 of the data is reserved for use as the PI function, and you
cannot access characters in the 80-FF hex range. Therefore, to
access characters in the 80-FF hex range, data bit 8 must be
enabled.
Font Set
This parameter allows you to select a font for the Code V feature. Valid
selections are 0 to 32. The following predefined values are available:
•
0 U.S. ASCII (the default)
•
1 German
•
2 Swedish
•
3 Danish
•
4 Norwegian
•
5 Finnish
•
6 English
•
7 Dutch
•
8 French
•
9 Spanish
•
10 Italian
•
11 Turkish
•
12 Japanese
•
13-23 Reserved
•
24-31 User Defined Sets
•
32 0858 PC Euro Multilingual
•
33 0923 Latin 9 8859-15 Euro