manualshive.com logo in svg

IBM 62174DU - IntelliStation A - Pro 6217, Installation Manual

Share
Download
IBM 62174DU - IntelliStation A - Pro 6217 Installation Manual Download Page 1

Welcome. . .

Thank you for buying an IBM
IntelliStation A Pro computer.

This

contains

information for setting up,
installing options, and configuring
your computer.
This book also contains
information for every day use,
and solving problems.

You can find the most current
information about your
computer on the IBM Web site at:
http://www.ibm.com/pc/support

Installation Guide

Installation Guide

Type 6217

IntelliStation A Pro

Go to the Computer Support

flow chart

Start the computer

Complete the setup

program

Set up the computer

Did the computer

start correctly?

Do you plan

to use Windows XP or

Red Hat Linux ?

Yes

Yes

No

No

System is ready to use.

• Register your computer:

Go to http://www.ibm.com/pc/register/

• Install options and applications

Install another

operating system

Summary of Contents for 62174DU - IntelliStation A - Pro 6217



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands