IBM 600E - ThinkPad 2645 - PII 400 MHz, Supplementary Manual, Page: 4 / 4

11
Select ThinkPad Hot/Warm Swap Driver, and click on Next.
12
Click on Finish.
13
Restart the computer.
Corrections to the User's Reference
This section corrects information in the User's Reference. Use this information instead of the
corresponding information in the User's Reference.
Ÿ
The term UltraslimBay tray in the User's Reference should be UltraBay tray.
Ÿ
If you want to use two diskette drives at the same time, you need to install one drive in the
UltraslimBay. The secondary drive can be one of the following:
– Attached to the computer's external diskette drive connector
– Attached through the port replicator
– In the bay of the docking station
Ÿ
If you dock your computer to a docking station:
– If you use a SelectaDock I or SelectaDock II docking station, connect the power cord to a
docking station and connect the AC Adapter to a SelectaBase 600 port replicator.
– If you use a SelectaDock III docking station, connect the power cord to the docking station.
Ÿ
Protection Notice Requirement
This device is protected by U.S. patent numbers 4631603, 4577216, 4819098, 4907093, and other
intellectual property rights. The use of Macrovision's copy protection technology in the device must
be authorized by Macrovision and is intended for home and other limited pay-per-view use only,
unless otherwise authorized in writing by Macrovision. Reverse engineering or disassembly is
prohibited.
4