IBM 6000 VA LCD 4U, Installation And Maintenance Manual

Page: 30 / 88

6. Connect the input and ground wires to the terminal block according to the
following illustration and Table 4.
Table 4. UPS wiring specifications
Wire functions
Terminal
position UPS wire
function Terminal wire
size rating
1
Tightening
torque
Input 1 Input ground 5.26 - 16 mm
2
(10-6 AWG)
2.49 Nm (22
inch-pounds)
2 L2 / Neutral In
3 L1 In
1
Use the following minimum wire size:
v 5.26 mm ² (10 AWG) for equipment grounding wire, 75°C copper wire minimum
v
8.37 mm
²
(8 AWG) for input line and neutral wires, 75°C copper wire minimum
7. Replace the terminal block cover.
8. Continue to “UPS initial startup” on page 17.
16
6000 VA UPS and 6000 VA EBM: Installation and Maintenance Guide