manualshive.com logo in svg

IBM 55F, Maintenance Information, Page: 128 / 362

Share
Download
IBM 55F Maintenance Information Download Page 128

Table 67: CE Options menu (CE Offline mode)
Function

Next menu

Verify Fix/Diags…

“CE Verify Fix/Diag menu” on page 108

Dump…

“CE Dump menu” on page 113

FMR Tape…

“CE FMR Tape menu” on page 115

Config/Install…

“CE Config/Install menu” on page 118

Logs…

“CE Logs menu (CE Offline Mode)” on page 133

Utilities…

“CE Utilities menu” on page 138

Verify Fix/Diags…

Allows the CE to check correct machine operation.

Dump…

Allows the CE to move dump data.

FMR Tape…

Allows the CE to complete microcode updates and to make or unmake an FMR tape.

Config/Install…

Allows the CE to customize the device to meet the customer's requirements at installation.

Logs…

Allows the CE to view the error logs.

Utilities…

Allows the CE to display control store and register data from any valid address. Use this option with

assistance from support personnel.

CE Verify Fix/Diag menu
Table 68 on page 108 shows the CE Verify Fix/Diag menu items. This menu allows the CE to select

diagnostic tests to run.

Table 68: CE Verify Fix/Diag menu
Function

Next menu

Cancel

“CE Options menu” on page 107

Test Device

“Status menus” on page 109, then “Load Scratch Tape menu” on page

117

Test Drive

“Load Scratch Tape menu” on page 117

Test Media

“Load Scratch Tape menu” on page 117

Test Head

“Load Scratch Tape menu” on page 117

Test Panel

“Status menus” on page 109

Test Wrap

“Status menus” on page 109

Test Frame Wrap

- Unplug From Silo -

“Status menus” on page 109

Test Fibre Wrap

“Test Fibre Wrap menu” on page 112

Loop Diag

“CE Loop Diag menu” on page 111

108  IBM 3592 TS1140, TS1150, TS1155, and TS1160 Tape Drives: Maintenance Information

Summary of Contents for 55F











































































































































































































































































































































































Reviews:

No comments