manualshive.com logo in svg

IBM 4957-A10, Appliance Manual

Share
Download
IBM 4957-A10 Appliance Manual Download Page 50

Figure 32. Replacing a drive

b. Grasp the drive carrier firmly and slide it out of the drive bay.

2. To install a drive follow this process:

a. With the ejector lever on the drive carrier open, insert the assembled drive carrier into the empty

drive bay in front of the chassis, as shown in the following figure.

Figure 33. Installing a drive in the front panel

b. Push the carrier all the way into the slot then close the drive lever to lock it in place.

c. Repeat the previous steps to assemble and install all other drives into the empty front drive slots.

Remove and install a fan
This section describes the process for removing and installing fans.
Note: Because the fans are hot-swappable, you do not have to power off the server before removing the

fan cover.
The following steps cover how to remove a fan:

1. Open fan cover (see the section on Removing or Replacing the Fan Cover ).
2. Remove the fan unit by grasping it by the finger hold tabs, as shown in the following figure.
3. Pull the unit straight up until it disengages from its slot. 

30  IBM Cloud Object Storage System: A10/C10/M10 Appliance Manual

Summary of Contents for 4957-A10































































Reviews:

No comments

Brands by name

Popular brands

Load more brands