IBM 4800-C41, Configuration Manual

Page: 19 / 42

Chapter 2. SUSE Linux Enterprise Desktop 11 procedures
This chapter presents configuration procedures that are specific to the SUSE Linux Enterprise Desktop 11
(SLED 11) operating systems, for these IBM Point of Sale hardware devices:
v
IBM 4694-207/247/307/347
v IBM 4820-1xx/2xx/4xx/5xx Display
v
IBM AnyPlace Kiosk 4836 and 4838-x3x/3xx/5xx/7xx/9xx
v
IBM SurePOS 100 4613-1x8
v
IBM SurePOS 300 4810-32x/33x/34x
v
IBM SurePOS 500 4846-5xx, 4851/4951
v
IBM SurePOS 700 4800-72x/74x/78x
Note: After you have configured SUSE Linux Enterprise Desktop 11 for you particular system, see
“JavaPOS packages installation” on page 8 and “RMA packages installation” on page 9, if
necessary for your environment.
IBM 4694-207/247/307/347
To fully configure SLED 11 to run on the IBM 4694-207/247/307/347:
1.
Install SLED 11 according to the documentation at http://www.novell.com/documentation/sled11/
index.html.
2. Perform the procedures in “Serial touch screen calibration” on page 3.
IBM AnyPlace Kiosk 4836/4838
To fully configure SLED 11 to run on the IBM AnyPlace Kiosk 4836/4838:
1. Install SLED 11 according to the documentation at http://www.novell.com/documentation/sled11/
index.html.
2. Setup the video display:
v FBdev driver (default, 4838-5xx/7xx/9xx only ): see “FBdev driver configuration” on page 6.
v
VIA driver: see “VIA display driver installation and configuration” on page 6.
3.
Perform the procedures in “Serial touch screen calibration” on page 3.
4. If necessary, perform the procedures in “MSR, Intermac scanner, and Omni scanner configuration” on
page 7.
IBM SurePOS 100 4613-1x8
To fully configure SLED 11 to run on the IBM SurePOS 100 4613-1x8:
1. Install SLED 11 according to the documentation at http://www.novell.com/documentation/sled11/
index.html.
2. Setup the video display:
v
FBdev driver (default): see “FBdev driver configuration” on page 6.
v
VIA driver: see “VIA display driver installation and configuration” on page 6.
© Copyright IBM Corp. 2009
11