IBM 4694-207, Configuration Manual

Page: 16 / 42

Sometimes the scanner might be configured to turn off after each scan. In such cases, use the barcode
provided in the scanner configuration documentation to configure the scanner back to default factory
setting so that it remains on after every scan.
These scanners are driven by the ti_usb_3410_5052 driver.
For more information, refer to the following publications:
v
Intermac: http://www-01.ibm.com/support/docview.wss?rs=219&uid=pos1R1003340
v Omni: http://www-01.ibm.com/support/docview.wss?rs=219&uid=pos1R1003410
JavaPOS packages installation
POS drivers need to be installed manually or configured together in SLEPOS 11 image creation according
to the documentation for the latest release at the IBM Support web site.
To install the JavaPOS packages:
1. Install the following packages:
v
For POSBranch, SLES 11, and SLED 11:
– UPOS 1.12.x:
- ibm-javapos- version - build .i386.rpm
- ibmposs- build .i386.rpm
- javax-usb-1.0.2-1.i386.rpm
- javax-usb-ri-1.0.2-1.i386.rpm
- javax-usb-ri-linux-1.0.2-1.i386.rpm
– Install kernel module package:
- Default kernel: http://forgeftp.novell.com/driver-process/staging/pub/update/ibm/sle11/
common/i586/ibm-aipsvcp-kmp-default-1.0_2.6.27.19_5-1.i586.rpm
- Physical Address Extension (PAE) kernel (SLES/SLED only, if applicable to your hardware) :
http://forgeftp.novell.com/driver-process/staging/pub/update/ibm/sle11/common/i586/
ibm-aipsvcp-kmp-pae-1.0_2.6.27.19_5-1.i586.rpm
v
For SLEPOS 11:
a. Start and run the SLEPOS YaST2 Image Creator provided with SLEPOS.
b. From the Image Creator Configuration Overview, edit the image that will include the RPM
Package Manager (RPM) package:
c.
From Image Preparation, select Add and Local Directory .
d. In the Path to Directory section, browse to the directory that contains the RPM.
e.
Click Add to add the RPM and return to the image configuration screen.
f. Click Change to make changes to the image.
g. Select Filter > Search .
h. Search for these JavaPOS RPM packages and check the boxes for them:
– ibm-javapos-
version - build .i386.rpm
– ibmposs- build .i386.rpm
– javax-usb-1.0.2-1.i386.rpm
– javax-usb-ri-1.0.2-1.i386.rpm
– javax-usb-ri-linux-1.0.2-1.i386.rpm
2.
Remove the old Java symbolic links and re-link them to the IBM JVM.
#rm /usr/bin/java
#ln -s /opt/ibm/java2-i386-50/jre/bin /usr/bin/java
8
Linux OS Configuration