IBM 4247 Model 003, User Manual

Page: 116 / 392

6. Press Scroll
↑
or Scroll
↓
until the printer displays
Printer Compatibility
8 (Auto at OILC end)
7. Press Enter to display the current value.
8. Press Scroll
↑
or Scroll
↓
until the desired value for automatic function after
end of OILC job value is displayed.
9. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
10.
Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
Printer Compatibility 9 (Suppress Timeout on No Data Loss
Intervention Required)
You can set this value to:
Standard (Default)
An intervention required status is sent to the host after a one-minute
timeout for a pending intervention required condition or a ten-minute
timeout for a not ready state.
Alternate
No intervention required status is sent to the host from any timeout
resulting from a “no data loss” or ten-minute non-intervention required
timeout.
Note: The printer performs a partial reset to put any change to this parameter
value into effect when you exit the Configuration Menu with Start or
Return
. Buffered data will be lost.
To change or check the suppress timeout on no data loss intervention required
value, follow these steps:
1. Press Menu.
2.
Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Coax Configuration
3.
Press Enter.
4. Press Scroll
↑
or Scroll
↓
until the printer displays
Coax Configuration
Printer Compatibility
5. Press Enter.
6. Press Scroll
↑
or Scroll
↓
until the printer displays
Printer Compatibility
9 (Suppress timeout)
7. Press Enter to display the current value.
106
4247 Model 003 User’s Guide