IBM 4-Port 10/100 Base-TX Ethernet PCI, Installation And Using Manual

Page: 26 / 40

2. At the command line, type:
lsdev -Cs pci | grep 4-Port
3. Press Enter.
Possible results are as follows:
v
If the 4-Port 10/100 Base-TX Ethernet PCI Adapter and is
AVAILABLE
, the
following is an example of the data that displays on your screen:
ent1 Available 2C-00 4-Port 10/100 Base-TX Ethernet PCI Adapter (23100020)
(Port 1)
ent2 Available 2C-08 4-Port 10/100 Base-TX Ethernet PCI Adapter (23100020)
(Port 2)
ent3 Available 2C-10 4-Port 10/100 Base-TX Ethernet PCI Adapter (23100020)
(Port 3)
ent4 Available 2C-18 4-Port 10/100 Base-TX Ethernet PCI Adapter (23100020)
(Port 4)
If a similar message displays and the 4-Port 10/100 Base-TX Ethernet PCI
Adapter displays as
Available
in the slot where you installed your adapter, you
are finished installing your adapter. Continue with “Chapter 7. Connecting to an
Ethernet Network” on page 19.
If the message on your screen indicates your adapter is
Defined
instead of
Available
, shut down your machine. Verify that the 4-Port 10/100 Base-TX
Ethernet PCI Adapter is installed correctly. Go to “Chapter 6. Installing the 4-Port
10/100 Base-TX Ethernet PCI Adapter” on page 15, and return to this section and
repeat the verification steps.
Note: If the message on your screen indicates your adapter is
Defined
a second
time, it may be necessary to contact your service representative.
v
If the adapter installed does not appear, continue with “Verify AIX Software
Installation”.
Verify AIX Software Installation
To verify that the device driver for the 4-Port 10/100 Base-TX Ethernet PCI Adapter is
installed, do the following:
1. If necessary, log in as root user.
2. At the command line, type:
lslpp -l devices.pci.23100020.rte
3. Press Enter.
Possible results are as follows:
v
If the 4-Port 10/100 Base-TX Ethernet PCI Adapter device driver is installed, the
following is an example of the data that displays on your screen:
Fileset Level State Description
-----------------------------------------------------------------------
Path: /usr/lib/objrepos
devices.pci.23100020.rte 4.3.3.10 COMMITTED PCI 10/100 Ethernet
Adapter Software
16
4-Port 10/100 Base-TX Ethernet PCI Adapter: Installation and Using Guide