IBM 4 LINE TELEPHONE WITH CALLER ID -412CID Installation And Operation Manual Download Page 33 | Manualshive

Page: 33 / 43

background image

33

SPEED DIALING

There are a total of 24 memory locations located in two groups, in which you can store your Speed Dial

numbers. Each memory location can store up to 24 digits, including PAUSE, FLASH, PULSE and TONE.

Storing Numbers into the First Speed Dial Group

1. Press the [STORE] key.
2. Enter the number to be stored including “1” if the call is long distance.
3. Press the corresponding Speed Dial key. A short ring will be heard to signal successful programming.

Storing Numbers into the Second Speed Dial Group

1. Press the [STORE] key.
2. Enter the number to be stored including “1” if the call is long distance.
3. Press the [SHIFT] key.
4. Press the Speed Dial key. A short ring will be heard to signal successful programming. The [SHIFT]

LED will revert to dark immediately after pressing the Speed Dial key.

Storing the Last Number Dialed into the First Group of Speed Dial Memory

1. Press the [STORE] key.
2. Press [REDIAL].
3. Press the Speed Dial key. A short ring will be heard to signal successful programming.

Storing the Last Number Dialed into the Second Group of Speed Dial Memory

1. Press the [STORE] key.
2. Press the [REDIAL] key.
3. Press the [SHIFT] key.
4. Press the Speed Dial key. A short ring will be heard to signal successful programming. The [SHIFT]

LED will revert to dark immediately after pressing the Speed Dial key.

Dialing Numbers in the First Speed Dial Group

1. Press the SPEED DIAL key to automatically access an available line and the extension will automatically

dial the stored number. The number will be shown on the display.

Dialing Numbers in the Second Speed Dial Group

1. Press the [SHIFT] key. The [SHIFT] LED will illuminate
2. Press the SPEED DIAL key to automatically access an available line and the extension will automatically

dial the stored number. The number will be shown on the display.

«
...
31
32
33
34
35
...
»

Summary of Contents for 4 LINE TELEPHONE WITH CALLER ID -412CID












































Reviews:

No comments

Related manuals for 4 LINE TELEPHONE WITH CALLER ID -412CID

Brand: Octopus Pages: 131

Brand: 3Com Pages: 118

Clearspan 6731i

Brand: Aastra Pages: 3

Brand: Aastra Pages: 18

Brand: Aastra Pages: 8

Brand: Aastra Pages: 97

Brand: Aastra Pages: 7

Brand: Aastra Pages: 104

Brand: Aastra Pages: 74

Brand: Aastra Pages: 100

FREELANCE XC 1500

Brand: BT Pages: 2

Brand: Uniden Pages: 64

Brand: Aastra Pages: 113

Brand: Aiphone Pages: 4

Brand: BellSouth Pages: 47

Brand: GE Pages: 21

Brand: GE Pages: 2

Brand: GE Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands