Testing the Data/Fax Modem
Ensure that the PC Card and cables are connected correctly before
you start the diagnostics program.
Warning: Save and close any open applications at this time to
avoid any risk of data loss.
Starting the Diagnostics Program for OS/2 Users
1
If you selected the install option for the diagnostics program
during the Data/Fax Modem software installation, then
double-click on the V34TEST icon on the OS/2 desktop and go
to step 6.
If you did not select the install option, then continue with
step 2.
2
Insert the Data/Fax Modem diskette in your computer’s
diskette drive.
3
Open an OS/2 full screen.
4
At the OS/2 prompt type a: (or the name of the diskette drive
in which you have inserted the diskette) and press Enter.
5
Type \os2\v34test and press Enter.
6
Follow the instructions as indicated.
If the tests run without errors, the Data/Fax Modem is ready for use.
If an error occurs, see “Problems While Testing the Data/Fax
Modem” on page 18.
14
PCMCIA Data/Fax Modem Installation and Testing
Title: AOX0CNTL CreationDate: 04/03/95 10:49:21
