3.11 Step 9
This step examines the drive as the possible source of the problem.
While pressing the power switch to turn on the power, watch for the following:
The three status lights come on for approximately 10 seconds, then go out.
The LCD displays the message READY-NOTAPE or READY-TAPE.
Did the three status lights come on and go out, and did the message READY-NOTAPE or READY-TAPE display?
NO Go to Step 10.
YES Go to Step 11.
7208 Tape Drive Service Guide
Step 9
¦ Copyright IBM Corp. 1998
3.11 - 1
