IBM 2810-A14, Manual

Page: 32 / 62

Table 9. Rack dimensions and clearances
Metric (mm) English (in.)
General dimensions
Height 1991 78.4
Width 600 23.6
Depth 1142 45.0
Clearances
Front door 1200 47.2
Back door 1000 39.4
Service and cooling See Figure 1 and Table 10 for detailed information.
Sides
You must adhere to the following space requirements around the sides of the
racks:
v You must place racks no closer than 450 mm (17.7 in.) to a wall.
v
You can position racks alongside (adjacent to) other racks.
v There are no space requirements between adjacent racks.
IBM service representatives must have enough space to open the front and rear
covers to service the unit, and must also be able to remove components and other
assemblies from the unit. See Figure 1 and Table 10 for minimum service
clearances.
Table 10. Clearance dimensions for service and cooling
Index Metric (mm) English (in.)
A 1200 47.2
Figure 1. Top view of clearance requirements for service and cooling
12
IBM XIV Storage System Introduction and Planning Guide