IBM 2216, Hardware Installation Manual

Page: 7 / 28

Setting Up the IBM 2216
These instructions explain how to rack-mount and surface-mount the IBM 2216.
1
Unpack and Verify
Unpack the IBM 2216 and verify that, along
with this guide, the following items were
included:
Documentation
¹
Caution: Safety Information–Read This
First, SD21-0030
¹
IBM 2216 Planning Guide, GA27-4105
¹
IBM 2216 Maintenance Guide, SY27-0350
¹
Hardware Configuration Quick Reference
Card, GX27-3988
Hardware
¹
Any cables ordered
¹
Rack Mount Installation aid
¹
Power cord for each power supply
¹
PCMCIA Modem (except in countries
where the PCMCIA modem is not
available)
Rack-mounting- proceed with step 2a.
Surfacing-mounting - proceed with step
2b on page 2.
2a
Rack-Mounting the Model 200
You need the following items:
¹
Cables, as required
¹
Eight rack-mounting screws
¹
Screwdriver
Notes:
1. You will need a second person to help hold
the IBM 2216 while it is being mounted.
2. If you have a shelf for the rack, install it
before continuing.
3. Do not use the installation aid if you have a
shelf installed.
Continue with step 3 on page 2.
1