IBM 16X Max, User Manual

Page: 34 / 68

Enabling DMA for Windows XP
To change the DMA parameter setting from the Windows XP desktop, do the
following:
1. Click Start --> Control Panel .
2. Click Switch to classic view .
3. Double-click System .
4. Click the Hardware tab.
5. Click the Device Manager button.
6. Click on the IDE ATA/ATAPI controller to expand the tree.
7.
Double-click on the controller that corresponds to where your CD-RW is
located
(Primary IDE
or
Secondary IDE)
.
8. Click on the Advanced Settings tab.
9.
Select the appropriate Transfer Mode pull-down that corresponds to the
CD-RW location, ( Device 0 for Master, Device 1 for Slave).
10. Select DMA if it is available.
11. Click OK .
C-2
IBM 48X/32X/48X/16X Max CD-RW/DVD-ROM Combination Drive: User’s Guide