v
For an extended battery module:
Locate the bezel that comes with the extended battery module.
Press the two side latches toward each other, align the bezel with the extended battery module,
and snap it into place.
13.
Remove the clear protective film that covers the LCD on the front of the UPS.
For more information about installing and operating the UPS and extended battery module, see the
Installation and Maintenance Guide
that comes with the UPS.
Important:
Before you ship the UPS in a rack cabinet, you must install a shipping bracket in front of the
UPS for extra protection. For more information, see “Installing the shipping bracket on the
UPS” on page 10.
Store this information with your UPS documentation for future use.
9
