14. The ARE YOU SURE window displays. Press Enter to accept the information.
15. The COMMAND STATUS screen displays.
v
The term
RUNNING
is highlighted to indicate that the installation and configuration command is in
progress.
v
When
RUNNING
changes to
OK
, scroll to the bottom of the page and locate the Installation Summary.
v
After a successful installation,
SUCCESS
displays in the Result column of the Installation Summary at
the bottom of the page.
16. Remove the installation media from the drive.
17. Press
F10
to exit SMIT.
18. Go to the adapter installation procedure, Chapter 4, “Installing the 10/100/1000 Base-TX Ethernet
PCI-X or Dual Port 10/100/1000 Base-TX PCI-X Adapter,” on page 9.
Verify AIX Software Installation
To verify that the device driver for the adapter is installed, do the following:
Verify 10/100/1000 Base-TX Ethernet PCI-X Adapter Software
Installation
1. If necessary, log in as root user.
2. At the command line, type:
lslpp -l devices.pci.14106902.rte
3. Press
Enter.
Possible results are as follows:
v
If the 10/100/1000 Base-TX Ethernet PCI-X Adapter device driver is installed, the following is an
example of the data that displays on your screen:
Fileset
Level
State
Description
-----------------------------------------------------------------------
Path: /usr/lib/objrepos
devices.pci.14106902.rte
5.1.35
COMMITTED
...Ethernet...
Adapter
Software
Path: /etc/objrepos
devices.pci.14106902.rte
5.1.35
COMMITTED
...Ethernet...
Adapter
Software
Verify that the
devices.pci.14106902.rte
filesets are installed at the AIX 5.1.0 or later level.
v
If no data displays on your screen, the 10/100/1000 Base-TX Ethernet PCI-X Adapter device driver
did not install correctly. Return to Chapter 3, “Installing the Device Driver Software,” on page 5.
Return to “Verifying the Adapter Installation” on page 9 and continue with step 1 again.
If you continue to experience problems, it may be necessary to call your system support
organization. Refer to your operating system documentation for instructions.
Verify Dual Port 10/100/1000 Base-TX Ethernet PCI-X Adapter Software
Installation
1. If necessary, log in as root user.
2. At the command line, type:
lslpp -l devices.pci.14108902.rte
3. Press
Enter.
Possible results are as follows:
6
10/100/1000 Base-TX Ethernet PCI-X and Dual Port 10/100/1000 Base-TX PCI-X Adapters Installation and Using Guide
Summary of Contents for 10/100/1000 Base-TX Ethernet PCI-X Adapter
Page 2: ......
Page 31: ......
Page 32: ...Part Number 80P3145 Printed in USA SA23 1301 02 1P P N 80P3145 ...
