• Connect Micro USB to any USB charger, 2 hours to charge.
• For best wireless performance perform a full charge.
Charging
• / - (controls volume level)
Volume Button
• While usb is connected: Red light indicates charging, Blue light indicates full
charge.
• Red light
fl
ashing twice indicates low battery. (low battery voice prompt)
LED
1. When headset is turned o
ff
, long press the MFB (6 seconds), until the
headset LED is
fl
ashing red and blue (pairing state voice prompt) headset is
now in pairing state.
2. Turn on the mobile phone bluetooth, press scan, wait until bluetooth
displays "iblast audio RUN".
3. Click the headset model to connect. After the connection is successful. The
headphone's blue light will
fl
ash.
4. Enter Password "0000" if your mobile phone needs you to enter a password.
Your headset should now be paired.
Steps to Connect Bluetooth Headset
1. Turn o
ff
bluetooth from mobile phone or other device that is already paired
then repeat steps 1-4 for 2nd bluetooth device.
2. Turn on mobile phone #1’s Bluetooth function and
fi
nd the wireless headset,
click connect to activate multipoint.
Multi-Point Function Steps
