© Copyright 2010 LOTRONIC SA
5
MIXING CONSOLE FUNCTION
1. SOURCE
BUTTON
Press the power switch to
turn the unit on. To switch
the POWER off press the
POWER switch again.
2. USB
PORT
Support USB playing and
you may also connect the
computer with the USB
cable but only when enter
into USB work mode.
3. CD
LED
When you enter into CD
work mode, the LED will light.
4. USB
LED
When you enter into USB
work mode, the LED will light.
5. INPUT
TOGGLE
SWITCH
Select which source will be
live to that channel based on
what you have connected to
the rear panel input section.
In CD1-2 position, the
internal CD units are active.
6. LED
METER
Indicates the master output level
7. MASTER
LEVEL
Adjusts master level output signal
8.
CH1 & CH2 GAIN CONTROL
Adjusts CH1 & CH2 level
9. HIGH
FADER
1-2
Adjusts CH1 & CH2 equalization of high frequencies.
10. MID FADER 1-2
Adjusts CH1 & CH2 equalization of mid frequencies.
11. LOW FADER 1-2
Adjusts CH1 & CH2 equalization of low frequencies.
12. CUE/MIX/PGM
CONTROL
Counter clockwise you will be able to monitor the assigned cue signal. Slowly turning the control
clockwise to the assigned cue signal. Slowly turning the control clockwise to the right allows you to
monitor. Moving the control clockwise to the right allows you to monitor PGM output.
13. CUE FOR CH1-2
Selects which source will be live to that channel for CH1 & CH2.
