© Copyright LOTRONIC 2012 LMH400LED-MKII
Page 6
21 – 40
41 – 60
61 – 80
81 – 100
101 – 120
121 – 127
128 – 192
193 – 255
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Auto gobo wheel rotate, speed increase
Reverse auto gobo wheel rotate, speed increase
5
GOBO AUTO
RUNNING
0
1 – 127
128 – 255
No
Gobo rotation, speed increase
Reverse gobo rotation, speed increase
6
STROBE
0
1 – 255
No
Strobe from slow to fast
7
DIMMER
0 – 255
Dimmer 0 to 100%
8
PRISM
0 – 12
13 – 255
No
Prism
9
PAN / TILT SPEED
0
1 – 255
Most speed
Speed from fast to slow
10
PAN FINE
0 – 255
Pan fine 16 bits
11
TILT FINE
0 – 255
Tilt fine 16 bits
12
RESET
0 – 149
150 - 255
No
Reset ( delay 3 seconds )
The following points have to be considered during the inspection:
All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded.
There must not be any deformations on the housing, glass pane, fixations and installation spots.
The electric power supply cables must not show any damage, material fatigue or sediments. Further instructions
depending on the installation spot and usage have to be adhered to by a skilled installer and any safety problems
have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or solvents.
CAUTION
: Disconnect from mains before starting maintenance operation!
Cleaning and Using Frequency of Product
Please make sure that the light is power off before dismantling or maintaining, it’s very important to keep the light
clean. Frequent cleaning will ensure maximum brightness output, but also prolong the life time. It’s suggested to use
the high quality, professional glass detergent and soft cloth to clean the light. It’s not allowed to use alcohol or
chemical solvent. The inner part of the light should be cleaned by vacuum cleaner at least once a year.
When the light doesn’t work, please check if the fuse is burnt out or not. If it is, the same fuse should be replaced,
find out the faulty and restart the light. But please note the repair must be handled by professional.
TECHNICAL SPECIFICATIONS
Channels: ................................................................................................. 12 DMX Channels
Rotation angle: .................................................................... Pan 585° Tilt 225° (16 bits fine )
Control mode: .......................................................................... Sound activated, Auto, DMX