©Copyright LOTRONIC 2016
LED8-QUAD
Page 4
Once your changes are made, press the ENTER button, and then press and hold the MENU button for at least three
seconds to confirm and lock the change into the system memory. To exit without making any adjustments, press the
MENU BUTTON. The display will lock after 30 secondes. Press the MENU button for 3 seconds to unlock.
FUNCTION MENU
ADDR
001 - 512, DMX Address setting
CHND
10 ch
38 ch, select the channel mode
SLND
Mast
SL 1
SL 2 ( MASTER, SLAVEC OPTION)
SHND
SHOW 0 – SHOW 15, Select the show mode
AUTO
OFF
ON (Auto Mode)
SOUN
On – Off (SOUND CONTROL)
SENS
000 – 100 Sound sensitivity control (0 close, 100 The most sensitive)
TINT1
Yes - No (TIL Reverse)
TINT2
Yes - No (TIL Reverse)
LED
On - Off (Background LIGHT ON/OFF)
DISP
Disp
Dsip (Reverse Display)
TEST
Test
RSET
Reset
Settings
DMX Address Setting
1. Press the MENU, UP or DOWN button until “
ADDR
” is displayed, press ENTER.
2. The current address will now be displayed and flashing. Press the UP or DOWN buttons to find your desired
address.
3. Press ENTER to confirm.
DMX channel mode
1. Press the MENU button until “
CHND
” is displayed, press ENTER. Either “
10CH
”, “
38CH
” will be displayed
2. Press the UP or DOWN buttons to find your desired DMX channel mode and press ENTER to confirm and exit.
SLND – Slave mode
To select
Slnd
, press the ENTER button to show the SLAVE MODE on the display. Use the DOWN/UP button to select
Mast
(MASTER),
Sl1
(SLAVE 1),
Sl2
(SLAVE 2) modes. Once the mode has been selected, press the ENTER button to
confirm.
Show modes 0-15 (Factory programs).
Show mode can run with or without sound active mode active.
1. Press the MENU button until “
SHND
” is displayed, press ENTER.
2.
“Sh X”
will now be displayed, “X” representing a number between 0-15. Programs 1-15 are factory programs,
while “Sh 0” is random mode. Press the UP or DOWN buttons to find your desired show.
3. When you have found your desired show press ENTER, then press and hold the MENU button for at least 3
seconds to activate. After you have set your desired show, it can be changed at any time using the UP or DOWN
buttons.
