LED-STUV24
2
DMX-CONTROLLED PROJECTOR
WITH WHITE & UV 2-IN-1 LEDS
INSTRUCTION MANUAL
Safety Instructions
•
Please read these instructions carefully, they include important information about the installation, usage and
maintenance of this product.
•
Please keep this User Guide for future reference. If you sell the unit to another user, be sure that he also
receives this instruction booklet.
•
Always make sure that you are connecting to the proper voltage, and that the line voltage you are connec-
ting to is not higher than that stated on the bottom of the fixture.
•
This product is intended for indoor use only!
•
The unit belongs to protection class I. It is essential that the unit is earthed.
•
To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable
materials close to the unit while operating.
•
The unit must be installed in a location with adequate ventilation, at least 20in (50cm) from adjacent sur-
faces. Be sure that no ventilation slots are blocked.
•
The minimum distance luminaire from that part of the luminaire or lamp to the lighted object is 0.5m.
•
Maximum ambient temperature (Ta) is 30°C. Don’t operate the fixture at higher temperatures.
•
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit
by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the
nearest authorized technical assistance center. Always use the same type of spare parts.
•
Make sure the power cord is never crimped or damaged.
•
Never disconnect the power cord by pulling or tugging on the cord.
•
Avoid direct eye exposure to the light source while it is on.
•
The product is for decorative purposes only and not suitable as a household room illumination.
DISCONNECT DEVICE
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall
remain readily operable.
CAUTION
Don't open the housing
Shock hazard
Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to
avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the
unit is secure and is able to support a weight of 10 times of the unit’s weight.
Operation
All functions and operations can be controlled manually on display without DMX
controller.
Enter into menu by pressing the MENU button and select the menu item via the up
and down keys. Press the ENTER button to confirm your choice. Increase or decrease
the value via the UP/DOWN keys. Press ENTER to confirm and exit the menu.
EN
