©Copyright LOTRONIC 2015
LED-CUBE Manual
3
Operation by Remote Control
NOTE: First remove the small plastic sheet from the battery cover before operation
1.
Brightness intensity and speed bu
tt
on: Adjust the speed when in smooth modes.
Change brightness intensity when the light is
fi
xed on one single color.
2.
ON/OFF bu
tt
on: Press this bu
tt
on to turn on and turn o
ff
the light. This bu
tt
on only
controls the light but not the Bluetooth func
ti
on. If the unit is charged, the last set
mode is kept in memory and the cube will be set on the last set mode. If the ba
tt
ery is
exhausted, the default mode is SMOOTH.
3.
Bluetooth ON/OFF bu
tt
on: Press this bu
tt
on to turn on and turn o
ff
the Bluetooth
func
ti
on. A
ft
er one press, the Bluetooth func
ti
on is ac
ti
vated. The Bluetooth indicator
light will start
fla
shing in blue and a voice says “POWER ON”. Ac
ti
vate the Bluetooth func
ti
on on your mobile
phone to pair it with the “color cube BT”. Once the Bluetooth is connected to your mobile phone, the Bluetooth
indicator will light up steadily in blue and the voice says “SPEAKER CONNECTED”.
If you leave the range of 10m around the cube, the Bluetooth indicator will
fl
ash in blue and a voice says
“SPEAKER DISCONNECTED”. If you go back into a range of 10m, the Bluetooth indicator glows steadily blue and
the voice says “SPEAKER CONNECTED”.
The Bluetooth indicator light is inside the cube below the speaker. The Bluetooth indicator light goes o
ff
when the
Bluetooth is o
ff
.
Once the Bluetooth is connected, press the bu
tt
on again to disconnect the Bluetooth.
Only one mobile phone can be paired at the same
ti
me with the LED-CUBE.
4.
Color selec
ti
on bu
tt
on: When the light is on, press this bu
tt
on to choose your favorite color as shown on remote
control (Six colors)
5. +
White warm bu
tt
on: press to increase the warmth in 7 steps.
6. -
White warm bu
tt
on: press to reduce the warmth in 7 steps.
7.
Color selec
ti
on bu
tt
on: When the light is on, press this bu
tt
on to choose your favorite colors (Total 7 colors)
8. The light will
fl
ash automa
ti
cally to the rhythm of the music.
9. 7 colors scroll automa
ti
cally
10. When you switch the unit on, the
ti
mer func
ti
on is disabled and the light works normally.
If you press the bu
tt
on once, the unit lights up in RED during 30 minutes and switches o
ff
the light and the
Bluetooth func
ti
on.
If you press the bu
tt
on twice, the light will light GREEN during 30 minutes. Then, the light and the Bluetooth
function will switch o
ff
.
If you press the bu
tt
on 3
ti
mes the light will light DARKBLUE during 30 minutes. Then, the light and the Bluetooth
func
ti
on will switch o
ff
.
If you press the bu
tt
on 4
ti
mes the light will light YELLOW during 30 minutes. Then, the light and the Bluetooth
func
ti
on will switch o
ff
.
If you press the bu
tt
on 5
ti
mes the light will light BLUE during 150 minutes. Then, the light and the Bluetooth
func
ti
on will switch o
ff
.
Summary of Contents for LED-CUBE2020
Page 26: ......
