©Copyright LOTRONIC 2018
LC192DMX-MINI
8
3.
Press the
SCENE
button that corresponds to the scene to be copied
4.
Press the
MIDI/ADD
button to copy the scene
5.
Use
BANK UP/DOWN
buttons to navigate to the bank that the Scene is to be copied into
6.
Press the
SCENE
button where the Scene is to be copied into. All LEDs will blink to confirm
3.5.3
Delete a Scene
Action:
1.
Press and hold the
PROGRAM
button until the LED blinks
2.
Use
BANK UP/DOWN
buttons to navigate to the bank containing the Scene to be deleted
3.
Press and hold the
AUTO/DEL
button
4.
Press the
SCENE
button that corresponds to the scene to be deleted. All LEDs will blink to confirm
Note: When deleting a scene, the physical location is not removed. However, all 192 DMX channels available to the scene will be set to
value 0.
3.5.4
Delete All Scenes
Action:
1.
Press and hold the
PROGRAM
and
BANK DOWN
buttons whilst switching the power off
2.
Turn the FIXTURE back on and all Scenes will be deleted
Caution: This process is irreversible. All scenes with data will be set to 0.
3.6
Playback
3.6.1
Running in Sound mode
Action:
1.
Press and hold the
MUSIC BANK COPY
button until the
MUSIC LED
is lit
2.
Use
BANK UP/DOWN
buttons to navigate to the bank which is to be run in Sound mode
3.
Alternatively, you can press a single
CHASE
button or several
CHASE
buttons in sequence and all Chases will be run in the
order selected
4.
You can adjust duration time using the
FADE TIME
fader
Note: In Sound mode, programs will be triggered by the sound using its built-in microphone.
Multiple chases selected will loop and run in the order originally selected.
3.6.2
Running in Auto mode
Action:
1.
Press and hold the
AUTO/DEL
button until the
AUTO LED
is lit
2.
If no
CHASE
button is pressed, the FIXTURE will automatically run a
BANK
program
3.
Use
BANK UP/DOWN
buttons to navigate to the bank which is to be run in Auto mode
4.
Alternatively, you can press a single
CHASE
button or several
CHASE
buttons in sequence and all Chases will be run in the
selected sequence.
5.
You can adjust time between steps using the
SPEED
fader and duration of the step using the
FADE TIME
fader
3.6.3
Blackout
Action:
1.
Press the
BLACKOUT
button to set all DMX values temporarily to 0.
APPENDIX
4.1
Introduction to DMX
There are 512 channels in a DMX-512 connection. Channels may be assigned in any manner. A fixture capable of receiving DMX 512
will require one or a number of sequential channels. The user must assign a starting address to the fixture that indicates the first
channel reserved in the controller. There are many different types of DMX controllable fixtures and they all may vary in the total
number of channels required. Choosing a start address should be planned in advance. Channels should never overlap. If they do, this
will result in erratic operation of the fixtures whose starting address is set incorrectly. You can however, control multiple fixtures of the
same type using the same starting address as long as the intended result is that of unison movement or operation. In other words, the
fixtures will be slaved together and all respond exactly the same.
