DMX512
This laser light is controlled by the standard DMX. Please connect
controlling panel with the lighting as following
Before using the DMX512 controller, you should set the channel
address.
It can be set 001~511 address, every binary address switch
has a digital no, please refer to:
No. Digital
No. No. Digital
No.
1st 1 6th 32
2nd 2 7th 64
3rd 4 8th 128
4th 8 9th 256
5th 16 10th
Function
switch
DMX Control Parameter Chart
Channel Function Value
Description
0
～
69
Close, laser OFF
70
～
139 Sound
active
mode
140
～
209 AUTO
mode
CH1
Mode
210
～
255 DMX
mode
0
～
84 clock
direction
running
85
～
169
Counter clock direction running
170
～
251
Both sides to rotation
CH2
Running
direction
252
～
255 Stop
rotation
0
～
20 No
twinkle
21
～
240
From slow to fast, 6 grade speed
CH3
Twinkle
speed
241
～
255
Twinkle by sound
CH4
Running
speed
0
～
255
0 is slow,255 is speedy, has 200
grade speed
CH5
Color
selection
No special effect
Maintenance
☆
Please clean the lens regularly. Do not do it using the wet cloth or
other chemical. the clean times is depend on the using frequency
and surrounding condition; it is recommended that should be
cleaned every 20 days;
☆
Please clean the lighting surface and engine outlet regularly.
☆
Be sure that there is no flammable or explosive subject nearby.
The least distance is 0.5 meters. at the same time, keep more
than 15cm between the wall and laser lighting;
Warning
Power off before installation or maintenance;
The danger class of this laser lighting is CLASS 3 B. it’s
dangerous for observing laser. The safe minimum distance is
13cm,the safe maximum time is 10 seconds;
Keep at least 0.5 meters distance between the lighting and
flammable material;
Technical parameters
1. Laser diode: DPSS blue450nm
2. Power supply: AC220V—240V, 50/60Hz
3. Laser power: Blue 200mW
4. Motor:
N1.8 high precision step motor
5. Control mode: sound control/auto/DMX
6. Dimensions: 272 x 100 x 135mm
7. Net weight: 2.3KG
8. Gross weight: 2.6KG
DANGER
LASER
RADIATION
AVOID
EXPOSURE
TO BEAM CLASS 3B LASER PRODUCT
