© Copyright Lotronic 2011
© Copyright Lotronic 2011
User’s manual
Thanks for your purchasing, please read this manual carefully before
operating the system. It gives you general information for your safe and
better operation.
INSPECTION
Check for the contents in the package. Refer to the following list:
1. Laser lighting: 1
2. Power cable: 1
3. User’s manual: 1
Technical parameters
1. Laser diode: DPSS, Red 650nm
2. Power supply: AC100-240V, 50/60Hz
3. Laser power: 200mW red
4. Motor: N1.8 high precision step motor
5. Control mode: sound control/auto/ DMX
6. Dimensions : 158mm x 196mm x 63mm
7. Net weight: 1.6kG
8. Gross weight: 2.0kG
DANGER
LASER RADIATION AVOID EXPOSURE
TO BEAM CLASS 3B LASER PRODUCT
When using this laser, the effect will change to the music. When you
change the sound and rhythm, the machine will change its speed and
direction.
Function Setting
0=OFF 1=ON X=OFF or ON
DIPSWITCH CHART
FUNCTION
#1 #2 #3 #4 #5 #6 #7 #8 #9 #10
0
X
X
X
X
X
X
X
X
1
SOUND ACTIVE
1
X
X
X
X
X
X
X
X
1
AUTO MODE
0
SET DMX ADDRESS FOR DMX
MODE
0
DMX/SLAVE
DIPSWITH CHART
Installation
1. Firstly, be sure that the mains voltage matches the voltage marked on
the base of the laser lighting;
2. Installation should be made by professional technician. Fix the laser
lighting and adjust the angle of the laser lighting to your needs;
3. Please check whether the fan and the exhaust are blocked;
4. There is a hole for connection. When hang the laser lighting, be sure
the cable can undertake 10 times of the lighting weight;
5. The laser lighting should be fixed;
6. It is essential to be earthed well for the sake of safety.
DMX512
This laser light is controlled by the standard DMX. Please connect control
panel with the lighting as following
Before using the DMX512 controller, you should set the channel address.
It can be set 001 ~ 511 address. Every binary address switch has a digital
no. Please refer to:
No.
Digital No.
No.
Digital No.
1st
1
6th
32
2nd
2
7th
64
3rd
4
8th
128
4th
8
9th
256
5th
16
10th
Function switch
Maintenance
Please clean the lens regularly. Do not use the wet cloth or other
chemical. The frequency depends on the usage and surrounding
conditions; it is recommended that it should be cleaned every 20 days;
Please clean the lighting surface and engine outlet regularly.
Be sure that there is no flammable or explosive subject nearby. The least
distance is 0.5 meters.
Warning
Power off before installation or maintenance. The danger class of this
laser lighting is CLASS
3
B. it’s dangerous to look into the laser beam. The
safe minimum distance is 50cm, the safe maximum time is 10 seconds;
Keep at least 0.5 meters distance between the lighting and inflammable
material.
GB
