MANUAL - WAVE10
5
searching will stop and the found stations will be saved automatically. You can access the stored stations via the
number buttons on the remote control.
AUX mode
Connect an audio lead from the Line output of your audio device to the AUX input on the unit. When a device
is plugged into the AUX socket, it will disconnect all other audio devices. In AUX mode, all functions can be
controlled by the external device.
TWS function
1. Make sure both speakers are OFF.
2. Go to your phone’s Bluetooth interface and make sure that it is not connected to either of the speakers. If
your phone is connected, choose to forget or remove the speakers from the list of available devices.
3. Turn both speakers ON, press the MODE button on both speakers. The word « BLUE » should appear on both
LCD screens and flash intermittently.
4. Press the « NEXT » button on either one of the speakers for 5 seconds. Both units will enter pairing mode.
5. One of the units will show the word « BLUE » on the LCD display. This is the master unit and will act as the
left channel, while the other one will be the slave unit and will act as the right channel.
6. Go to your phone’s Bluetooth interface and select « WAVE10 » from the list of available devices. If pairing is
successful, the word BLUE on the master unit will stop flashing.
7. To disconnect the speakers, select any other mode on either one of the speakers.
Trouble shooting
If a problem occurs, follow the steps in the table below. If problem still can’t be solved, please contact your
retailer.
Problem
Possible cause
Solution
No sound when
power is turned on
1. The power cord is not connected
1. Connect the power cord
2. Faulty mains outlet
2. Use an outlet that receives power
3. No input source
3. Connect an input source
4. Volume set to minimum
4. Set the volume to an appropriate level
Distorted sound
1. Master volume is set too high
1. Reduce the volume
2. Damaged speaker
2. Check if the speaker is damaged
No sound from
Karaoke
1. Microphone plug is not firmly inserted 1. Insert the mic firmly into the socket
2. The microphone is not switched on
2. Switch the microphone on
3. Mic volume set to the minimum
3. Increase the microphone volume
No sound from MP3
source
1. Un supported file format
1. Change into MP3 format
2. Illegal copy
3. USB/TF source not properly inserted
3. Insert the USB/TF source properly
Specifications
Power supply ..........................................................................................................
100-240V~50/60Hz
RMS/Max. power ...................................................................................................................400/800W
Impedance ................................................................................................................................4 Ohms
Freq. response...................................................................................................................
55Hz -20kHz
Sensitivity .......................................................................................................................
85dB (+/-2dB)
BT band.........................................................................................................................
2402-2480MHz
Max. RF emission value ..........................................................................................................2.18dBm
FM band ...........................................................................................................................
87.5-108MHz
Dimensions ........................................................................................................... 360 x 310 x 870mm
Weight ........................................................................................................................................
15.9kg
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent
possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take this product for environmental safe recycling.
