© Copyright LOTRONIC 2012 VHF1 / VHF2
Page 3
INSTALLATION
1. Connect Jack 6.35mm mix output to microphone input of
your mixer
2. For a good operation, don’t place the receiver near to
sources of interference. Place the receiver in 1m distance from
the ground and let at least 1m free space around the receiver.
DESCRIPTION RECEIVER
1-
Antennae :
Unfold the antennas to their maximum length to get the best possible signal for each channel
2-
Power switch :
Use this button to switch the receiver on or off
3-
Power led :
When you switch the receiver on, this led lights up. That means the receiver is on.
