©Copyright LOTRONIC 2013
QMS15A
3
F
Safety Precautions
•
The i
nstallation of this speaker cabinet must be carried out by
qualified
persons following the approved safety
standards.
•
Do not
attempt to clean the plastic enclosure
with
solvents or petrochemical based cleaners.
•
Do not place objects which are sources of heat on the speaker cabinet such as lighting equipment or smoke
machines.
•
Do
not
expose
the
speaker cabinet to direct rain or water.
Liquid
getting
into
the box
will
risk
a short circuit
and
will
be hazardous.
•
Do
not
stack the speaker cabinet
in
a manner that could cause injury if a cabinet becomes dislodged.
Additional precautions for amplified devices of the series.
•
Before installation, ensure that the voltage and frequency
of
power outlet match
the p
ower
requirements of the loudspeaker.
•
Disconnect from the mains prior to making connections
to
the speaker.
•
Make sure
that
the power-cord is never crimped nor damaged by sharp edges. Never
let
the power-cord
come
into
contact
with
other cables. Only handle the power-cord by the plug.
•
Replace the fuse only by a fuse with the same specifications as the original one
.
Warning
Before connecting
or
operating your new speaker, please read the instruction manual carefully.
Functions
1. LCD display with MP3 controls
2. USB input
3. SD/MMC/MS card input
4. Bluetooth antenna
5. Bluetooth LED
6. Mode switch
7. Mic input via XLR Female or 6.5mm Jack connector
8. Microphone level control
9. Line level control
10.Master volume control
11. AUX input via RCA or XLR Female connector
12. Treble control
13. Bass control
14. Clip LED: Reduce the volume or the line level when is
LED lights up
15. Power LED: Light up when the unit is switched on
16. LINE output via 6.5mm Jack or XLR Male connector
17. Mains connector
18. ON/Off switch
Bluetooth pairing procedure
- Press MODE button to toggle between USB/SD input and Bluetooth
- The Bluetooth icon flashes if the unit is not paired
- The unit is identified as "Bluetooth"
- The paring code is "0000"
- The Bluetooth icon remains steadily light up when the unit is paired.
Specifications
Max. power ...................................................................................300W
RMS power ....................................................................................150W
Woofer size ........................................................................... 15"/38cm
Woofer coil size ..................................................................................2"
Woofer Magnet ............................................................................ 40 Oz
Woofer impedance .................................................................... 8 ohms
Horn driver ......................................................................................... 1"
HF driver protection ......................................................................... PTC
Crossover frequency point ............................................................ 2kHz
Frequency response ............................................................ 40Hz-20kHz
Sensitivity 1W/1m ................................................................. 90dB ±3dB
Weight ........................................................................................ 12.5kg
Dimensions ........................................................... 410 x 350 x 680(mm)
GB
