©Copyright LOTRONIC 2016
3
DJM90USB-BT
Front Panel
：
1. MICROPHONES:
DJ/Mic have their own dedicated level control. Microphones have individual 2 band EQ section
2. TALKOVER
This is a two position switch OFF/ON
3. 2-BAND EQ
The main MIC channel has 2 rotary tone controls. The LOW & HIGH controls adjust the amount of high and low frequencies.
4. CHANNEL LEVEL FADERS
These are used to adjust the output level for each channel.
5. CROSSFADER
The crossfader allows the mixing of one source into another. The crossfader in your unit is removable and can be easily replaced if
needed.
6. CHANNEL SELECTORS
These are used to switch between Line input and PHONO, MIC, USB input on each channel.
7. MASTER:
This controls the overall output from the mixer, master output to the PA system
8. DISPLAY:
The unit has two LED displays Left output, Right output the left and right output display shows the
Outputs level of the mixer
9. MP3 MODE
The USB jack can connect to USB stick.
|<< : Use this button to re-start the track or to select the previous track.
Play/Pause: Each time you press this button, the operation changes from play to pause or from pause to play.
>>|: Use this button to select the next track.
VOL-: Use this button to control level down.
VOL+: Use this button to control level UP.
EQ: Allow you to select the effect.
LED DISPLAY: Display to MP3's information.
10. Bluetooth
Display Bluetooth working status. When you turn on the power, the Bluetooth is turn on, the lights started flashing in the online
10
