IBIS
GmbH
SiViB
Record Display Manual
Page 4
IBIS
Ingenieurbüro für Instandhaltungs- und Schwingungsmeß-Systeme GmbH
Reinheimer Str. 17, 64846 Groß-Zimmern, Germany; www.ibis-gmbh.de
Tel. +49 6071/42222, Fax +49 6071/71707, Email: [email protected]
Configuration
If you need to make changes to the pre configured operation mode, use the pushbuttons labelled
with arrows.
Up arrow:
Leave display screen to menu
Move one menu level up
Enter arrow:
Select an option
Go to a lower menu level
Down arrow:
Skip through the options of the current menu level
You can set up:
Menu language, display mode, some units calculations (depending on SiViB Record type),
communication port, CAN-Bus parameters.
Please note that any changes made to the configuration have to be stored in the display’
s
non volatile memory, if you want them to come back after a power loss.
Select „store config“ from the highest menu level.
Changes in the communications and CAN-Bus parameters get effective after a power cycle.
