FULL SUSPENSION BIKES
Note on 243 Loctite:
Shake the bottle well before applying!
HARDWARE
TORQUE SPEC.
THREAD TREATMENT
Cable Ports (Ripley AF / Ripmo AF only)
2Nm
Grease
Derailleur Hanger Bolt
5 Nm
Grease
Downtube Rock Guard (Ripley / Ripmo only)
2 Nm
Loctite 243
Forward Shock Mount Bolt
10 Nm
Loctite 243
Lower Link 6mm Preload Bolts
2 Nm
Loctite 243 on threads, grease on flange
Lower Link Pinch Bolts
10 Nm
Loctite 243
Lower Shock to Clevis Bolt
20 Nm
Ti anti-seize
Swingarm to Clevis Pivot Bolts
10 Nm
Loctite 243
Rear Brake Caliper
6 Nm
Loctite 243
Seat Binder
5 Nm
Ti anti-seize
Upper Link Bolts
10 Nm
Loctite 243
BUSHINGS
On all models, apply Slick Honey (grease) to all bushings during reassembly.
HEXLE REAR AXLE
There is not a numerical torque figure for the Hexle. We recommend
tightening the 5mm with your multi tool that you carry with you.
This way you’ll be able to remove it in case of a flat out on a ride.
TORQUE SPECS
FOR MORE IN-DEPTH INSTRUCTIONS DOWNLOAD THE FULL SET UP GUIDE AT:
ibiscycles.com/support/set-up_guide/
Ibis Cycles | 2240 Delaware Avenue, Santa Cruz, California, 95060 | ibiscycles.com
