ibidi Heating System, Universal Fit
Description
Drawing
Heating Insert µ–Slide*
Heating Insert LabTek*
Temperature Adjustment Set:
1 temperature sensor
1 perforated ibidi µ–Slide 8 Well
1 perforated ibidi µ–Dish
35mm, high
1 perforated ibidi µ–Dish
35mm, low
USB cable to connect the Temperature Controller with a
computer
Country specific power cord to connect the external power
supply to the wall socket
External power supply for the Temperature Controller
USB flash drive with IncuControl software
*One Heating Insert of your choice is delivered with the ibidi Heating System, Universal Fit. If
needed, more Heating Inserts can be ordered separately.
4.2
Combination Options
The parts of the ibidi Heating System, Universal Fit are combined as shown in Figure
. The Heated
Lid and Heated Plate fit on an inverted microscope stage equipped with a universal mounting frame
for multiwell plates. They are connected to the Temperature Controller.
The ibidi Heating System, Universal Fit can be combined with the Gas Mixer unit, that provides CO
2
and O
2
(optional) control and a defined humidified atmosphere. Detailed information on the Gas
Mixer unit is given in the Gas Mixer instructions.
To hold several geometries of Slides and Dishes, the Heated Plate can be equipped with different
Inserts (Section
): Insert for µ–Dish
35mm, high
, Insert for µ–Dish
35mm, low
, Insert for µ–Slides, and
Insert for LabTek™ chambered coverglass.
For parallelization of experiments, the Heated Plate for 4 µ-Slides provides a platform to observe
4 Slides in parallel. Detailed information is given in the instructions of the ibidi Heating System,
Universal Fit for 4 µ-Slides (#10927).
Version 2.2 (May 23, 2019)
16
Instruction Manual
