ibidi Heating System, Universal Fit
The upper glass part of the Heated Lid is heated. The electrical cable is connected to the Temperature
Controller. The Heated Lid fits exactly and securely onto the Heated Plate.
For gas incubation, the Heated Lid is equipped with inlets for the gas flow and the humidity sensor.
Detailed information on the Gas Incubation System is given in its
Figure 6 – Heated Lid
4.5
Heated Plate
The Heated Plate provides the base for the ibidi Heating System, Universal Fit. The lower part of the
Heated Plate fits into any microscope stage with a universal mounting frame for multiwell plates.
The electrical cable (1.5 m) is connected to the Temperature Controller.
Figure 7 – Heated Plate, top view
Instruction Manual
19
Version 2.2 (May 23, 2019)
