ibidi Pump System
1.5
Disclaimer
• ibidi shall not be held liable, either directly or indirectly, for any damage incurred as a result of
product use.
• The contents of this manual are subject to change without notice for product improvement.
• This manual is considered complete and accurate at publication.
• This manual does not guarantee the validity of any patent rights or other rights.
• If an ibidi software program doesn’t function properly, this may be caused by a conflict from
another program operating on the computer. In this case, take corrective action by uninstalling
the conflicting product(s).
• ibidi is a registered trademark of ibidi GmbH in Germany and other countries.
1.6
Safety Considerations
WARNING
• Only operate the ibidi Pump System with the supplied components.
• Only use the cables and plugs delivered with the system. The power plug of the control unit
must be inserted in an outlet with a ground (earth) contact.
• Do not replace detachable power cables by power cables with inadequate specifications. By
violating these instructions you risk electric shock and fire.
• Only use extension cables that have a protective ground wire.
• Do not operate the ibidi Pump System under conditions that pose a risk of explosion, implosion,
or the release of gases.
• Only operate the ibidi Pump System with water.
• Do not place flammable solids, liquids, gases, or gas outlets near the system (e.g., matches,
ethanol, propane gas, solvents). Do not bring these products in contact with any other compo-
nent of the system either.
• Do not operate a damaged ibidi Pump System. If the housing seems damaged or something is
rattling inside the controller, contact the
for repair.
CAUTION
• Ensure that the external power supply is easily accessible. The ibidi Pump System must be
installed in a manner such that none of its components hinders access to the external power
supply.
Version 2.6 (May 12, 2022)
10
Instruction Manual
