ibidi Heating System, Multi-Well Plates, K-Frame
1.5
Disclaimer
• ibidi shall not be held liable, either directly or indirectly, for any damage incurred as a result of
product use.
• The contents of this manual are subject to change without notice for product improvement.
• This manual is considered complete and accurate at publication.
• This manual does not guarantee the validity of any patent rights or other rights.
• If an ibidi software program doesn’t function properly, this may be caused by a conflict from
another program operating on the computer. In this case, take corrective action by uninstalling
the conflicting product(s).
• ibidi is a registered trademark of ibidi GmbH in Germany and other countries.
1.6
Safety Considerations
WARNING!
• Only operate the ibidi Heating System, Multi-Well Plates, K-Frame with the supplied compo-
nents.
• Only use the cables and plugs delivered with the system. The power plug of the control unit
must be inserted in an outlet with a ground (earth) contact.
• Do not replace detachable power cables by power cables with inadequate specifications. By
violating these instructions you risk electric shock and fire.
• Only use extension cables that have a protective ground wire.
• Do not operate the ibidi Heating System, Multi-Well Plates, K-Frame under conditions that pose
a risk of explosion, implosion, or the release of gases. Only operate the ibidi Heating System,
Multi-Well Plates, K-Frame with aqueous solutions.
• Do not operate a damaged ibidi Heating System, Multi-Well Plates, K-Frame. If the housing
seems damaged or something is rattling inside the controller, contact the
for repair.
• Some accessible parts of the Heated Plate and Heated Lid can reach temperatures up to 55°C.
Avoid touching the temperature-controlled parts of the system when you have set the Temper-
ature Controller to high temperatures.
CAUTION
• Ensure that the external power supply is easily accessible. The ibidi Heating System, Multi-
Well Plates, K-Frame must be installed in a manner such that none of its components hinders
access to the external power supply.
Version 2.0 (March 22, 2019)
8
Instruction Manual
