IBEX TS100, Quick Start Manual

Page: 3 / 10

QUICK START GUIDE
2022-1.0 IBEX EQUIPMENT CO

Cut and remove the banding and zip ties holding the hay stop, box of parts, and
PTO shaft (Figure 2 & Figure 3).
Figure 2
Figure 3

Remove the hay stop guard arm and side guard panels (Figure 4 & Figure 5).
These are secured to the pallet via wood screws and washers. Then place them
to the side.
Figure 4 Figure 5

Remove the lag bolts that are holding the main three point hitch in place (Figure
6). Then cut the banding holding the back of the belt rake frame (Figure 7).