08
GB
STOPPING A COOKING ZONE
- Press the selection button of the required cooking zone.
- Press the "-" button to display heat level . Now the zone goes
off, the indicator goes off after 10 seconds.
- To stop rapidly, press simultaneously the "-" and the
respective cooking zone selection.
The heat level automatically goes down to . The cooking
zone goes off.
GENERAL STOP
The cooking zones and the timer can be stopped
at any moment by pressing the On-Off button.
RESIDUAL HEAT INDICATOR
The control panel tells the user when the surface temperature of
the cooking zones exceeds about 60°C, by the following
displaying: . When the temperature goes back below 60°C, the
display goes off.
For ending the cooking, we advise switching off the cooking zone
and using the residual heat of the zone to finish cooking gently.
N.B. After a cut in the current, the residual heat indicator
disappears completely, even if the surface temperature exceeds
60°C.
. OPERATING THE ADDITIONAL COOKING ZONE
(TWO ZONES)
The cooking zone with two zones is
fitted certain models .............................
>
It is active in totality when the cooking zone is in function ; the
control led of the additional cooking is displayed.
To desactivate the additional cooking zone :
- Press again on the additional cooking zone touch. The Led goes
off when it is desactivated.
To re-activate the additional cooking zone :
- Press on the cooking zone button. The Led is active again.
PROGRAMMING A COOKING ZONE (according to the model)
Every cooking zone can be programmed for a maximum time of 99
minutes.
- Start the required zone by following the previous instructions.
- Press on simultaneously the touch "-" and "+" to activate the
timer, " " is displayed.
- Press again on the "+" button to select a time in minutes
between 0 and 99 minutes or press on the "-" button to decrease
the time between 30 minutes and 0. The timer control led near
the level is displayed.
--> the programmed time can be modified at any moment.
When the time is run, the cooking zone goes off automatically and
an audible beep sounds for 1 minute, press a button to stop it.
--> If any zone is activated, the timer can be used alone, as
reminder, it will ring at the end of the programmed time.
Example
LED
TYPE
B
LED
7
TYPE
B
7
LOCKING BUTTON OPERATION
. FAST HEATER OPERATION
Every cooking zone on the hob is equipped with a fast heater for
raising the cooking zone’s temperature faster.
Starting the fast heater
- Press the on/off button .
- Start the required zone, press the "
+
" button to obtain position
"
9
", release the button briefly and press again the "
+
" button ;
the display alternates showing "
A
" "fast heater" and "
9
" heat
level.
- If necessary reduce to the required heat position, the display
alternates showing "A" "fast heater" and the new heat position.
Cooking
position
Power
released
(%)
Time of
fast heater
(minutes)
Maximum
operating
time before
automatic
cut off*
0
:
0 %
:
0
:
0 H
:
2.5
%
:
0
:
2
H
1
:
3 %
:
1
:
6 H
2
:
6 %
:
3
:
6 H
3
:
11 %
:
5
:
5 H
4
:
16 %
:
6,5
:
5 H
5
:
19 %
:
8,5
:
4 H
6
:
32 %
:
2,5
:
1,5 H
7
:
45 %
:
3,5
:
1,5 H
8
:
65 %
:
4,5
:
1,5 H
9
:
100 % :
0
:
1,5 H
E.g. 1800 W zone at position 6 = 32% of 1800 W power released
When the "Fast heater" is on, the zone supplies 1800 W power for 2.5
minutes, and adjusts to 576 W after this time.
* For increased safety, the cooking zones cut off automatically if they
are left on too long. The cut off depends on the heat level used.
To desactivate the fast heater
- Switch on the cooking zone, press the "
-
" button to come back
to a normal heat level, decrease to the heat level required or to
« 0 " to stop the cooking zone.
The locking function prevents the accidental activation of the hob
by children, and it is also useful during the cleaning of the hob.
TO LOCK THE HOB
. (Example for hob with 4 zones)
Press the ON/OFF button and then (only after this operation the
child lock can be activated)
Press simultaneously the minus key
and the top left selection key, until
you hear the beep sound; if you do
not feel a beep sound, switch OFF
the hob and repeat all the operation
of setting.
After press again the top left
selection key.
This operation procedure must take
place within 10 sec, and no other key
than the one described above may
pressed; otherwise the input will be
cancelled for not being completed.
All displays show an “L” for
LOCKED (=child lock against
unintentional activation) – if a
cooking zone is at stage “hot, “L”
and “H” appear alternately.
TO UNLOCK THE HOB
For unlock the control unit, it is
necessary that the minus key and
the top left selection key (cooking
zone back left) are pressed
simultaneously and subsequently
pressing the minus key again.
The looking is now removed and the
Touch Control returns to STAND BY
mode.
