background image

 

 

 

 

 

Rated voltage  

Rated Input Power 

Chuck capacity 

Weight  

Impact rate at nominal speed 

Impact energy per stroke  

Protection class 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Unpack all parts and lay them on flat, stable surface.

 

Remove all 

packing materials. Make sure the delivery contents are complete 
and free of any damage. If you find that parts are missing or 
show damage, do not use the product but contact your dealer. 
Using an incomplete or damaged product represents a hazard to 
people and property. 

 

Ensure that you have all the accessories and tools needed for 
assembly and operation. This also includes suitable personal 
protective equipment. 
 

 

 

 

: 230V~50Hz 

: 1150W 

: 17 mm 

: 6.07Kg 

: 4100/min 

: 10 J 

 

 

: IP20 

 

                                                     SETUP 

 

 

 

 

 

 

 

 

 

 

 

 

 

UNPACKING AND ENSURING 

 

WARNING!

 

The product must be fully assembled before 

operation! Do not use a product that is only partly assembled 
or assembled with damaged parts! Do not connect the product 

to power supply before it is completely assembled!

 

      IBL DH10-78 

                                  PRODUCT SPECIFICATIONS 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for DH-45-20

















Reviews: