Installation
Controls - How to Operate Your Refrigerator
Owner’s Manual
Congratulations on your new iBeeCool purchase!
Please read the enclosed information to help
you become familiar with your purchase.
Upon receiving your new product, please ensure the unit has been transported in an upright
position, if not, please let the unit stand one hour before energizing the unit.
Refrigeration equipment must be properly installed, and requires an indoor level floor, and
adequate air circulation with a cool and dry environment, and heat conditions not to exceed
80 Fahrenheit or 26 Celsius. Avoid a location of high humidity, which may cause a decrease in
efficiency. Location should be away from heat and moisture generating equipment since high
ambient temperature may cause the unit to malfunction and void the warranty.
Electrical requires proper grounding and dedicated circuit, and any tampering will void the
warranty.
1. Plug in your machine.
2. Press the “
SET
” button for 2 seconds until
ST
flashes on the display.
3. Press the “
UP
” or “
DOWN
” buttons
accordingly to change the
SETPOINT VALUE
.
4. Once satisfied with the temperature, press
the “
EXIT
” button or wait 30 seconds.
Please note: Set points are 2° to 4° Celsius (35°
to 38° Fahrenheit) for a refrigerator.
Refrigeration Controls
When changing your temperature setting
, be mindful when selecting your temperature set
point. Selecting a setting too low will cause the coil to freeze up and will result in a warmer
cabinet temperature and may damage your unit. To maintain correct airflow inside your cabinet,
your shelving requires proper spacing leaving two to three inches of space between the back
wall, and do not over fill your unit with product or it may result in warmer cabinet temperature.
Page 3
