2
3. Connections
1.
Remove factory 3
rd
brake
light.
2.
Connect red
wire
off new brake light to +12v and black to ground at factory
3
rd
brake light connector. This connection will power the brake light when
the
brake is pressed.
3.
Run
extension
cable though vehicle, up to
monitor
.
Make
sure
to run cable in
the correct orientation (female end to monitor and male end to camera).
Avoid placing video cable where it can get pinched or damaged.
Connect to
monitor's reverse AV input.
4.
If using a RCA monitor, a
ttach the
adapter cable to monitor end of
the
extension cable. Connect yellow
video rca to the reverse camera input of the
radio or video display.
Connect the DC power
cable, with the red wire to a
sw12v power source and black to ground (a metal, non-painted
surface).
5.
Connect brake light camera to the extension cable, and after verifying
functionality mount the brake light to the vehicle using the factory hardware.
4.
Maintenance
Although this Rear View Camera requires little care, you can still maintain its
condition and performance by occasionally clean the camera lens with damp soft
cloth.
Summary of Contents for TE-3BDP
Page 4: ...3 4 Specifications ...
