IBCcontrol VariMax50M, Manual

Page: 25 / 32

23
Address Name Designation Data
form Read/
Write Factor Unit
10 Current rotor
speed Only calculated if the speed
reference value remains constant
between two pulses on the
rotation monitor. Displays 0 if no
value is available.
To ensure the correctness of
the measured value the speed
reference value should be
changed. This will cause the
registry to read as 0 until the
current value is displayed.
UINT 16 Read 100 rpm
11 Error code Reads 0 if no error, 3-23 error
code according to Discrete
inputs, other codes internal
faults. UINT 16 Read
12 Tripped control Reads 1 if VariMax has tripped. UINT 16 Read
Continued from previous page