5. Applications
Connector inside adapter
Connector plugs alone
1. Remove Guide Cap from the device.
1. Open the Cover on the Guide Cap.
2. Insert tip of cleaner into LC Adapter
2. Insert LC connector into the Guide Cap.
3. Push the Outer Shell to start cleaning the LC
connector end face. A “pop” sound indicates end of
cleaning process. Close the cover after use.
Be careful not to slant the IBC Brand Cleaner LC while
inserting into the adapter.
Do not overly exert force during insertion as this may
cause damage to both the connector and the IBC
Brand Cleaner LC.
If pushing Outer Shell is inhibited, remove IBC Brand
Cleaner LC from adapter and ensure that there is no
sizable debris inhibiting the cleaning process.
3. Push the Outer Shell to start cleaning the LC
connector end face. A “pop” sound indicates end of
cleaning process. Close the cover after use.
Be careful not to slant LC connector while inserting into
the Guide cap.
Do not overly exert force during insertion as this may
cause damage to both the connector and the IBC
Brand Cleaner LC.
If pushing Outer Shell is inhibited, remove IBC Brand
Cleaner LC from adapter and ensure that there is no
sizable debris inhibiting the cleaning process.
CLICK
!!
Push straight.
Guide Cap
LC Plug
Guide Cap
Cover
Standard
Extended Mode
LC Adapter
Note: This drawing shows only LC, but this product will clean MU.
Note: This drawing shows only LC, but this product will clean MU.
POP
!!
