5. Applications
Connector inside adapter
Connector plugs alone
1. Remove Guide Cap from the device.
1. Open the Cover on the Guide Cap.
2. Insert tip of cleaner into SC Adapter
2. Insert SC connector into the Guide Cap.
3. Push the Outer Shell to start cleaning the SC
connector end face. A “pop” sound indicates end of
cleaning process. Close the cover after use.
Be careful not to slant the IBC Brand Cleaner SC while
inserting into the adapter.
Do not overly exert force during insertion as this may
cause damage to both the connector and the IBC
Brand Cleaner SC.
If pushing Outer Shell is inhibited, remove IBC Brand
Cleaner SC from adapter and ensure that there is no
sizable debris inhibiting the cleaning process.
3. Push the Outer Shell to start cleaning the SC
connector end face. A “pop” sound indicates end of
cleaning process. Close the cover after use.
Be careful not to slant SC connector while inserting into
the Guide cap.
Do not overly exert force during insertion as this may
cause damage to both the connector and the IBC
Brand Cleaner SC.
If pushing Outer Shell is inhibited, remove IBC Brand
Cleaner SC from adapter and ensure that there is no
sizable debris inhibiting the cleaning process.
POP
!!
Guide Cap
SC Plug
Guide Cap
Cover
POP
!!
Push straight.
Standard
Extended Mode
SC Adapter
Note: This drawing shows only SC, but this product can clean ST
and FC.
Note: This drawing shows only SC, but this product can clean ST
and FC.
