This manual assumes that the door has been prepared for a US
standard deadbolt lock. If the door has not been prepared, please
refer to the documentation that came with the door cutting hardware.
Preparing a Standard US Preparation for Lock Installation
With the bolt extended (A), locate the stamped
“UP” in the top back corner of the bolt (B).
Insert the bolt into the prepared hole on the
door being sure that the “UP” arrow is pointed
upwards. Now, ensure that the cross slot (C) is
centered vertically (x-axis) of the hole.
B
C
A
Using the supplied screws, attach the bolt to
the door.
1
BioBolt Biometric Deadbolt
Intelligent Biometric Controls
Installation Manual
