![background image](http://html1.mh-extra.com/html/ibc-water/afb16-180/afb16-180_installation-and-operating-instructions-manual_605234014.webp)
Page 14
For correct operation the cam should be set to stop, the position at the point of each function.
This is done at the factory and rotation checked at this time. However, resetting may be
necessary from time to time should the unit fail to draw brine. Setting is simple, index position
to service position, (fully in), switch off power, loosen screw "A", adjust cam to position shown
above. Switch on power.
MODEL 180 VALVE CAM POSITION
GENERAL MAINTENANCE
FIG. 19