IBC SOLAR SolControl Pro, Manual

Page: 41 / 47

41
Energy meter ALE3 (S0)
§
Pulse value of the S0 interface is 1000 pul/kWh
§ Energy meter suitable for IPL function
Configuring the IPL meter
In the factory, the meter’ s S0 interface is set up in a way that allows for pulses to be transmitted in both
directions (in and out), when energy is flowing. With this setting it is not possible to determine the direction
of flow.
To use the meter for IPL you will need to configure the S0 interface for one energy flow direction.
You will need to make the following settings, depending on the recorded measurement.
Measurement Use Setting
Energy fed into the grid Feed-in meter Out mode
Energy drawn from the grid Import meter In mode
Energy used by electrical equipment Consumption meter In mode